• Design Wheel x Tire Size 29 x 2.25" (29 x 2.4" Max) (Some front derailleurs may reduce tire clearance. Check manufacturer’s specifications to confirm clearance before installing.)
• Susp Fork Length (Travel) 506 mm (100 mm Travel)
• Rigid Fork Length 483 mm
• Fork Offset 51 mm
• Front Spacing 110 x 15 mm Thru-axle
• Front Brake (Rotor)Flat mount (160–180 mm), flat mount frame standard (35 mm thickness), 42 mm bolt length
• Front Rack Mounts Yes, lowrider compatible. Salsa Down Under rack recommended.
• Fork Accessory Mounts Yes, one set of Three-Pack mounts on each fork leg
• Headset, Upper IS41
• Headset, Lower IS52
• Seatpost 27.2 mm
• Seat Collar 32.0 mm
• Dropper Compatible (Routing) Yes, internal
• Front Derailleur Type Road, braze-on, 2x, bottom-pull
• Bottom Bracket Press Fit BB92, 41 x 92 mm
• Crankset (Max & Min Ring) 1x MTN Boost: 40t Max; 2x RD Boost outer ring: 46–50t, inner ring: 30–36t *Oval chainrings subtract 2t from max*
• Rear Brake (Rotor) Flat mount (140–160 mm), flat mount frame standard (25mm Thickness), 32 mm bolt length
• Rear Spacing 148 x 12 mm Thru-axle
• Rear Axle Size 12 x 174, TP = 1.5, TL = 20
• Derailleur Hanger QBP #FS2322
• Rear Rack Mounts Yes, Salsa Rack Lock seatpost collar required. Salsa Wanderlust Rack recommended. Salsa Bent Rack Struts (part #RK8030) required for installation on 58 cm and 60 cm frames. Not compatible with Salsa Wanderlust HD Rack
• Rear Fender Mounts n/a
• Water Bottle Mounts Frames up to 54cm: 2 in main triangle. Frames 56cm and larger: 3 in main triangle.
• Under Downtube Mount Yes, two pair.
• Top Tube Mounts Yes, compatible with Salsa Top Tube bag.
• Internal Dropper Post Routing 1x mechanical drivetrain: Route the dropper post cable through the drive side of the down tube. Di2 drivetrains: Mount the Di2 battery in the seatpost, then route the dropper post cable through the drive side of the downtube.
• External Dropper Post Routing 1x and 2x mechanical and Di2 drivetrains:Route the dropper post cable through the dynamo rear light holes on the non-drive side of the top tube.

This specifications are from the information the brand releases and may vary without previous notification.

Build ups´ or modification requests specifications will vary according to the components the buyer chooses.

This product comes pre-assembled from factory but requires a thorough inspection from our mechanics before being sent to you that will delay expected delivery times from 24 to 48hrs.

Please have this in consideration when purchasing!